(877) 728-6237
 
 

You have no items in your shopping cart.

Subtotal: $0.00

Swim N Spa Balancer: pH Plus (5 LB)

More Views

Swim N Spa Balancer: pH Plus (5 LB)

Be the first to review this product

Swim N Spa pH Plus is used to raise the pH in pool and spa water. The water in
the pool or spa should be maintained at a pH of 7.2-7.6 and total
alkalinity from 80-140 ppm. Test water frequently with suitable test kit
to ensure proper pH is maintained. Swim N Spa pH Plus is compatible with all
sanitizers including bromine, chlorine and biguanide.


NOTE: PH PLUS CAN NOT BE SHIPPED TO CALIFORNIA!

Availability: In stock

$20.95

Details

ACTIVE INGREDIENT:
Sodium Carbonate................................100%

SPA INSTRUCTIONS
This product should be used if pH is below 7.2.
1. Turn on air blower, jets or lter system.
2. Premix 1 oz. of this product with water in plastic pail and add
diluted product to spa.
3. Retest water after 30 minutes.
4. Follow steps 1-3 until pH and total alkalinity are in the range of
7.2-7.6 and 80-140 ppm respectively.


NOTE: Always wait 30 minutes between doses and test water before
each addition of this product.


POOL INSTRUCTIONS
Test for pH with a reliable test kit. If the pH is low (7.2 or below) add this
product according to the chart below. Pre-dissolve this product in a
plastic pail and slowly pour around the perimeter of the swimming pool
while the circulation system is operating. Allow system to operate for 1
hour after application. Retest the pH. If pH is still low, repeat this
process until the pH reaches 7.4-7.6.

BASE

DEMAND

GALLONS IN POOL
  5,000 10,000 20,000
1 2.6 oz. 5.1 oz. 10.3 oz.
2 5.1 oz 10.3 oz 1.3 lbs
3 7.7 oz 15.4 oz 1.9 lbs
4 10.3 oz 1.3 lbs 2.5 lbs
5 12.8 oz 1.5 lbs 3.2 lbs
6 15.4 oz 1.9 lbs 3.9 lbs
7 1.1 lbs 2.2 lbs 4.5 lbs

Additional Information

Capacity No

Customer Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.